High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is really a challenging problem for owners. From the desired temperature to their favorite light level, guests will probably return for an additional stay when they can customize their room to suit their preferences. However, providing these functions using old technology wastes plenty of energy. For instance, there are tons of difficulties with the old card key switches. Guests can put any card within the old switches, or they may ask for more than one card. Even though hotel desk refuses to offer more than one card to a guest, she/he may claim to have lost the card.
The standard old technology of hotel card switch. Additionally there is a lot of over intake of lights and AC energy because of things running even when guests aren’t inside their rooms, which can cause a financial loss for your owner. Of course, no hotel owner would like to prohibit guests from using a comfortable stay, nor do owners expect guests to get into a dark or cold hotel room. No one is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think should they separate the AC from your main network, less energy will be consumed, and some feel that motion sensors are the solution. However, these approaches forget to resolve the situation. The AC is regarded as the energy-consuming device of, and motion sensors may be nightmares since they only function according to movement detection, meaning that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company supplies the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has many options, such as a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the new means for hotel energy saving technology. By installing this door sensor in the entrance to a room, connecting it to the Energy Servant’s digital input, and programming the logic lines, the issue of room occupancy is completely resolved.
These logics could be defined for this sensor to control room energy without any discomfort for guests:
Logic 1: When there is any movement inside the room, the occupancy mode will likely be on.
Logic 2: When the main door is closed and opened, a flag will switch on for one minute to ascertain if there is movement in room. If no movement is detected after one minute, the system will activate energy-saving mode. This can be beneficial in situations whenever a guest enters the room briefly. In energy-saving mode all lights are off with the exception of a nightlight, which stays on for 3 hours in case there is another guest getting a nap. Also, the AC is definitely not turned off, but its temperature will be decreased by 2 degrees. It will help save energy with time.
Logic 3: When the energy-saving mode is enabled without any movement is detected for over 3-5 hours, the nightlight and AC will likely be turned off automatically. Additionally it is easy to define lower temperature levels for that AC. In addition, the Energy Servant can make the AC on/off if this recognizes that a balcony window/door is open. All this requires is adding a magnetic contact linked to the balcony window/door and programming the required smart decision. The lighting harvest sensor helps save energy by wscgid balcony lights off when there is enough sun light.
Another practical and beneficial ability of this sensor is its built-in thermostat, which helps retain the right temperature all the time. This will be significant to keep furniture fresh and intact. Also, in hot spots and whether or not the room is empty for some time, humidity and bad smells will never turn into a problem within the room. This sensor could be programmed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This could happen repeatedly throughout the day if needed. An identical performance could be programmed in cold spots to avoid mold.
An alternative choice of the smart device is TV control. When the hotel offers the guest having a room tablet, she/he is able to control the room’s TV with it. This sensor was placed in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and many satisfactory comments from guests who enjoyed their luxurious stay in this hotel.
TIS offers the chance to meet both hotel owners and guests interests and desires with just a couple items and in probably the most energy-efficient possible way. To learn more or schedule a consultation, call us at www.tiscontrol.com